Fujitsu Stylistic 3500 Technical Reference Manual page 32

Table 3-14. BIOS Setup Power Savings Options (Continued)
Option
Standby Timeout
Auto Suspend Timeout
Suspend Mode
Auto Save-To-Disk
Resume On Modem Ring
Resume On Time
Resume Time
Advanced Features
Submenu
Settings
Off Standby Mode turns off various devices in the system, including
1 Minute the screen and the CPU until you start using the computer again.
2 Minutes Select the period of time the system should be inactive before it
4 Minutes automatically enters standby mode. When in standby mode, some
6 Minutes system components, including the display, are turned off to
8 Minutes conserve battery power. Select Off to disable the Standby Mode
12 Minutes Timeout feature.
16 Minutes
Off Determines the amount of time elapsed with no system activity
5 Minutes before system operation is suspended automatically.
10 Minutes
15 Minutes
20 Minutes
30 Minutes
40 Minutes
60 Minutes
Suspend Determines the suspend mode used when you press the Suspend/
Save To Disk Resume button or when the Suspend Mode Timeout expires.
Selecting [Suspend] also allows you to configure the Save-To-Disk
Timeout option.
Note: You must choose [Suspend] to use the Resume On Modem
Ring and Resume On Time options. If [Save To Disk] is selected,
and either Resume On Modem Ring or Resume On Time are
enabled, the system will suspend to RAM and won't save to disk.
Off Determines whether the system automatically performs a
After 1 Hour save-to-disk operation after 1 hour in Suspend mode. To use this
feature, the Suspend Mode option must be set to [Suspend].
Off Select [On] to configure the system to resume operation when an
On incoming call is detected by your modem.
This feature will detect a modem ring on the built-in modem, a
modem installed in a PC Card slot, or an external modem
connected to a serial port; however, implementation of the ring
indicator function differs between modem vendors, so this feature
may not be supported by some third-party modems.
To use this feature, the Suspend Mode option must be set to
[Suspend]. If [Save To Disk] is selected, and Resume On Modem
Ring is On, the system will suspend to RAM and won't save to disk.
Off Select [On] to configure your system to resume operation at the
On time of day specified in the Resume Time field.
To use this feature, the Suspend Mode option must be set to
[Suspend]. If [Save To Disk] is selected, and Resume On Time is
On, the system will suspend to RAM and won't save to disk.
00:00:00 Determines time of day system will resume when the Resume On
Time option is On. Enter the time of day in HH:MM:SS format.
Note: system uses a 24-hour clock.
Select this submenu to further refine power management BIOS
options. See Table 3-15 for more information.
Description
BIOS Setup 22