Create Option - Fujitsu Stylistic 3500 Technical Reference Manual

Option
/INFO
/REFORMAT
The example below shows the type of information that is displayed when PHDISK is called without a
command line option. This example displays both the save to disk FILE INFORMATION and
save-to-disk PARTITION INFORMATION headers. These headers are displayed only when both a
save-to-disk partition and a save to disk file exist. (The USAGE and OPTIONS headers are displayed in
several screens displayed by PHDISK).
Note: When a save-to-disk partition and file both exist, save-to-disk data is stored in the partition first and any
excess data is stored in the save-to-disk file. It is recommended that you configure your system to use
either a save-to-disk partition exclusively or a save-to-disk file exclusively. This ensures that your
save-to-disk data is stored in contiguous disk space.
PHDISK 3.2.20 -- Phoenix NoteBIOS 4.0 (TM) Save to Disk Preparation Utility
Copyright (c) Phoenix Technologies Ltd. 1995-99. All rights Reserved.
Copyright (c) FUJITSU LIMITED. 1998-99
Save to Disk file information:
Your Save to Disk file is named C:\SAVE2DSK.BIN and has a size
of xxxx KBytes. It has System, Hidden, and Read Only attributes.
Save to Disk partition information:
Partition starts at sector xxxxx (head xx, cylinder xx, sector xx)
Partition size: xxxx KBytes total
Current System Status:
You currently need a Save to Disk area of xxxx KBytes. PhDisk will
also require additional overhead and will automatically calculate the
actual required space.
You have both a file and a partition. Save to Disk will default
to file. Either delete the file, or the partition.
Usage:PHDISK [options]
/CREATE (/FILE or /PARTITION)
/DELETE (/FILE or /PARTITION)
/INFO
/REFORMAT /PARTITION
This utility configures a hard disk to utilize the Phoenix NoteBIOS 4.0
Save to Disk feature. Please refer to your user manual for information
regarding Save to Disk.

CREATE Option

The CREATE option measures the amount of on-board memory, and partitions a segment of the hard
disk drive large enough to store all the data that might be there. The CREATE option formats the
save-to-disk partition or file, marking bad spots on the hard disk drive as they are found.
Table 3-20. PHDISK Command Line Options (Continued)
Parameters
/PARTITION Displays data about the save-to-disk partition.
/FILE Displays data about the save-to-disk file.
/PARTITION Reformat the save-to-disk partition. This option is typically used if a
hard disk error is detected in the save-to-disk partition.
Description
-- Create STD file or partition
-- Delete existing STD file or partition.
-- Information on STD disk area(s)
-- Reformat existing STD partition
PHDISK Hard Disk Preparation Utility
3
28