Boot Menu Options; Boot Sequence Submenu; Table 3-11 Bios Setup Boot Menu Options; Table 3-12 Bios Setup Boot Sequence Submenu - Fujitsu Stylistic 2300 Technical Reference Manual

Hide thumbs Also See for Stylistic 2300:
Table of Contents

Advertisement

Boot Menu Options

Boot menu options are described in Table 3-11.
Option
QuickBoot Mode
Boot-Time Diagnostic
Messages
Setup Prompt
BOOT SEQUENCE
SUBMENU
Numlock

Boot Sequence Submenu

Table 3-12 describes settings in the Boot Sequence submenu.
1. [Diskette Drive]
2. [Hard Drive]
1. [Hard Drive]
2. [Diskette Drive]

Table 3-11 BIOS Setup Boot Menu Options

Settings
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Off
Auto
On

Table 3-12 BIOS Setup Boot Sequence Submenu

Setting
Determines the order that the systems searches
drives for a bootable image.
Tap on item 2 to change the boot sequence.
Description
Determines whether the full set of tests are run
during the Power-On Self Test (POST).
When Enabled is selected, the following occurs:
• A less extensive memory test is performed and
the size of installed memory is not displayed
during the memory test.
• The Real Time Clock (RTC) is not tested.
When Disabled is selected, the full set of tests are
run.
Determines whether status messages are displayed
as the Power On Self Test (POST) is performed.
Select Enabled to display messages.
If Disabled is selected, messages are not displayed
and the logo screen is displayed. (If POST errors
occur, POST messages are displayed regardless of
this setting.)
Determines whether the BIOS Setup prompt
message is displayed when you start the system.
Select Enabled to display the message.
If Disabled is selected, the message is not displayed,
and you must attach an external keyboard and press
F2 while the system is booting to enter BIOS Setup.
(You cannot enter BIOS Setup by double-tapping
with the pen when this option is disabled.)
Select this submenu to configure the order in which
drives are searched for a bootable image.
Determines the initial state of the keyboard Numlock.
Select Auto to turn on Numlock automatically if a
keyboard is connected when you start the system.
Description
BIOS Setup
Microsoft Corp. Exhibit 1020
3-19

Advertisement

Table of Contents
loading

Table of Contents