Boot Sequence - Fujitsu LifeBook T731 User Manual

D
O NOT CARRY YOUR
SHOCKS OR VIBRATION
When you power on your LIFEBOOK, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your LIFEBOOK Tablet PC will emit
an audio warning and/or an error message will be displayed. See "Power On Self Test Messages" on
page 118. Depending on the nature of the problem, you may be able to continue by starting the operating
system or by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your Tablet PC will load your operating system.
N
EVER TURN OFF YOUR
WILL CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR
THE NEXT TIME

Boot Sequence

The procedure for starting-up your Tablet PC is termed the Bootup sequence and involves your Tablet
PC's BIOS. When your LIFEBOOK Tablet PC is first turned on, the main system memory is empty, and
it needs to find instructions to start up your Tablet PC. This information is in the BIOS program. Each time
you power up or restart your Tablet PC, it goes through a boot sequence which displays a Fujitsu logo until
your operating system is loaded. During booting, your Tablet PC is performing a standard boot sequence
including a Power On Self Test (POST). When the boot sequence is completed without a failure and
without a request for the BIOS Setup Utility, the system displays the operating system's opening screen.
LIFEBOOK T
ABLET
,
AS YOU RISK DAMAGING YOUR
LIFEBOOK T
ABLET
. See "Power On Self Test Messages" on page 118.
72 - Starting Your LIFEBOOK Tablet PC
PC
AROUND WITH THE POWER ON OR SUBJECT IT TO
T PC.
ABLET
PC P
DURING THE OWER
O S T (POST)
N ELF EST OR IT
LIFEBOOK T PC
ABLET ON