PC Card. The cover provides a rigid cap over the antenna to prevent damage during everyday use. P O I N T The FMW42RC1 antenna cover was tested with specific ® models of Symbol , Proxim...
58_0497_02.fm Page 2 Tuesday, July 10, 2001 2:18 PM ASSEMBLING THE ANTENNA COVER KIT Note: This section is applicable only to antenna cover model FMW42RC1 only; the FMW42CR2 model is pre-assembled. The radio antenna cover kit consists of the following parts: Plastic Hood Plastic Base Two screws (M2.5 x 8 mm long, finish:black zinc)
58_0497_02.fm Page 3 Tuesday, July 10, 2001 2:18 PM INSTALLING THE RADIO ANTENNA COVER To attach the radio antenna cover to the pen tablet PC, perform the following steps. 1. Position the antenna cover in relation to the back of the pen tablet PC as shown in Figure 2.
1-800-8Fujitsu (1-800-838-5487) or e-mail us at: email@example.com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd. Stylistic is a trademark of Fujitsu PC Corporation. All other trademarks mentioned herein are the property of their respective owners. We cannot guarantee the accuracy of the contents of this document.