Table of Contents
Advertisement
Quick Links
Fujitsu PC Corporation has made every effort to ensure
the accuracy and completeness of this document;
however, because ongoing development efforts are made
to continually improve the capabilities of our products,
we cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions, or
future changes herein.
Fujitsu and the Fujitsu logo are registered trademarks of
Fujitsu Limited; Stylistic is a registered trademark of
Fujitsu PC Corporation.
Kensington and MicroSaver are registered trademarks of
the Kensington Technology Group.
Microsoft is a registered trademark of Microsoft
Corporation. Windows 2000 Professional and Windows
XP Professional are trademarks of Microsoft
Corporation.
Responsible Party Name:
Declares that product:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and, (2) This device must accept any interference
received, including interference that may cause undesired operation.
Note:
For more detailed information about the FCC rules and their applicability to the Stylistic
ST4000P Series pen tablet PC, refer to Chapter 5 of this document.
DECLARATION OF CONFORMITY
Fujitsu PC Corporation
Address:
5200 Patrick Henry Drive
Santa Clara, CA 95054
Telephone:
408-982-9500
Model Series: Stylistic® ST4000P
Complies with Part 15 of the FCC Rules
PCMCIA and CardBus are registered trademarks of the
Personal Computer Memory Card International
Association.
Intel, Pentium, and SpeedStep are registered trademarks
of Intel Corporation.
Wi-Fi is a trademark of the Wireless Ethernet
Compatibility Alliance (WECA).
All other products are trademarks or registered
trademarks of their respective companies.
Copyright 2002 - Fujitsu PC Corporation. All rights
reserved. No part of this publication may be copied,
reproduced, or translated, without the prior written
consent of Fujitsu PC Corporation. No part of this
publication may be stored or transmitted in any
electronic form without the prior consent of Fujitsu PC
Corporation
FPC58-0714-02
according to FCC Part 15
C o p y r i g h t
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Fujitsu Stylistic 4110P
Summary of Contents for Fujitsu Stylistic 4110P
-
Page 1: Declaration Of Conformity
Fujitsu PC Corporation has made every effort to ensure the accuracy and completeness of this document; however, because ongoing development efforts are made to continually improve the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. - Page 2 S t y l i s t i c S T 4 0 0 0 P S e r i e s - U s e r ’ s G u i d e...
-
Page 3: Table Of Contents
About This Guide ......v Fujitsu Contact Information ....v Warranty Information . - Page 4 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e...
- Page 5 Preface...
- Page 6 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – P r e f a c e...
-
Page 7: Preface
Type of device connected, if any Fujitsu Online You can go directly to the online Fujitsu product catalog for your pen tablet PC by going to the Fujitsu web site at: http://www.fujitsupc.com P O I N T You must have an active internet connection to use the online URL links. - Page 8 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – P r e f a c e...
- Page 9 Getting Started with Your Pen Tablet PC...
- Page 10 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e viii...
-
Page 11: Getting Started
Getting Started with Your Stylistic Pen Tablet PC Figure 1-1 Stylistic ST4000P Series Pen Tablet PC The Stylistic ST4000P Series pen tablet PC is a high- performance, pen-based computer that has been designed to support Microsoft Windows 2000 Profes- sional or Windows XP Professional. This chapter provides an overview of the Stylistic ST4000P Series pen tablet PC and its features. -
Page 12: Optional Accessories
Screen Protectors (12-pack) Pen tether * For the latest list of accessories available for your Stylistic ST4000P Pen Tablet PC, be sure to frequently check the Fujitsu Web site at: www.fujitsupc.com. Table 1-1 Stylistic ST4000P Optional Accessories Fujitsu Part Number... -
Page 13: Stylistic Pen Tablet Pc Features
STYLISTIC PEN TABLET PC FEATURES Features and controls that you use to operate the Stylistic ST4000P Series pen tablet PC are outlined below and illus- trated in Figures 1-1 through 1-5. Details on using these features and controls are provided later in this manual. System Status LEDs... - Page 14 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e Tablet Dock Latch Point System...
- Page 15 Pen Holder Air flow vents Pen Tether PC Card Slot Attachment Point Figure 1-4 Stylistic ST4000P Series Pen Tablet PC Features (Top View) Top Features: • Pen: The main input device that you use to execute programs and enter data. A pen holder is built into the pen tablet PC to store the pen when not in use.
- Page 16 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e DC Input Jack ™...
- Page 17 Air Flow Vents Figure 1-6 Stylistic ST4000P Series Pen Tablet PC Features (Right Side View) Right-Side Features: • Pen: The main pointing device that you use to execute programs and enter data. A pen holder is built into the pen tablet PC to store the pen when not in use. •...
-
Page 18: Status Display
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e STATUS DISPLAY Icons appear in the Status display indicating the status of system functions such as system power and battery... - Page 19 In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off. Icon Mode/State Battery • On State • Idle Mode •...
-
Page 20: Application Buttons
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e APPLICATION BUTTONS The six application buttons are located on the upper right-hand side of a vertically-oriented system. - Page 21 Refer to specific details above.* Pressing the Fn button twice in succession (within the “sticky” time*), causes the Fujitsu menu to appear on your screen, allowing you to modify certain system settings. G e t t i n g S t a r t e d...
-
Page 22: Navigation Buttons
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e NAVIGATION BUTTONS The two navigation buttons are located on the lower right-hand side of a vertically-oriented system. -
Page 23: Tertiary Functions Of Application And Navigation Buttons
The system is booting up while the Fujitsu logo is displayed immediately after turning on the system. The table below indicates how the buttons act while the system is booting up and while you are in the BIOS. -
Page 24: Connectors And Peripheral Interfaces
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e CONNECTORS AND PERIPHERAL INTERFACES Connectors and peripheral interfaces on the Stylistic ST4000P Series pen tablet PC allow connection of a... - Page 25 Connector/ Pen Tablet Peripheral PC Icon IEEE 1394 jack Suspend/ Resume button Page Up/ Page Down Local Area Network (LAN) Battery Release Latch Wireless LAN On-Off Switch The IEEE 1394 jack allows you to connect between your pen tablet PC and peripherals such as a digital video camera.
- Page 26 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e...
-
Page 27: Using Your Stylistic
Using Your Stylistic ST4000P Series Pen Tablet PC... - Page 28 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T w o...
-
Page 29: System States
Using the Stylistic ST4000P Series Pen Tablet PC This chapter covers the fundamental concepts, basic system operation and use, and system functions of the Stylistic ST4000P Series pen tablet PC. You should famil- iarize yourself with this information before you attempt to operate the system. -
Page 30: Powering Up The Pen Tablet Pc
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T w o Icon Appearance Current State On State... - Page 31 To suspend system operation: 1. Press the Suspend/Resume button, or carry out the Standby command from your operating system or power management program. (If your system is configured to suspend operation using Hibernate mode, which is explained later in this procedure, a message is displayed while data is saved to your hard disk.) C A U T I O N...
-
Page 32: Resuming System Operation
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T w o may be logged off the network after a period of inactivity while system operation is suspended. -
Page 33: Calibrating The Pen
CALIBRATING THE PEN Calibration of the pen adjusts the cursor position on the screen relative to the position of the pen tip. You calibrate the pen to adjust the distance error between where the pen actually touches the screen and where the system “thinks”... -
Page 34: Removing And Installing The Battery
S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T w o Approximate Battery Charge Charge Time... -
Page 35: Modem Connection
Operation of the Bridge Battery When installed in the pen tablet PC, the battery provides power to some system components—even when the system is in the Off state. When the battery is removed, power is supplied to these components by a “bridge” battery that is built into the pen tablet PC. - Page 36 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T w o C A U T I O N DIMM replacement should only be performed at a static-free workstation.
-
Page 37: Care And Maintenance
Care and Maintenance... - Page 38 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T h r e e...
-
Page 39: Protecting The Display Screen
To obtain additional screen protectors, check with your reseller, or go to the Fujitsu Web site at www.fujit- supc.com for ordering information. Additional informa- tion about installation is included with the screen protectors. -
Page 40: Storing The Pen Tablet Pc
• The system brightness may be set too low, causing the screen to appear too dark. To change system brightness, press the Fn button twice to open the Fujitsu menu. Brightness can be adjusted from the menu. • An external monitor may be selected. Press the Fn and Display Select buttons to determine whether the pen tablet PC display screen is selected. - Page 41 (If you aren’t getting any sound, uncheck the Mute box if it is checked.) • Press the Fn button twice to open the Fujitsu menu. Volume can be adjusted from the menu. • Ensure that the mute box in the system volume control (accessible from the system tray) is not set.
- Page 42 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T h r e e...
-
Page 43: Specifications
Specifications... - Page 44 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n F o u r...
-
Page 45: Stylistic St4000P Hardware Specifications
Stylistic ST4000P Series Hardware Specifications The following table provides general hardware specifications of the Stylistic ST4000P Series pen tablet PC by category. Stylistic ST4000P Specifications Physical Specifications Dimensions 11.86” w x 8.66” d x 0.82”-0.88” h (301.3mm x 220mm x 20.9-22.3mm) Weight 3.2 lbs. - Page 46 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n F o u r Stylistic ST4000P Specifications (Continued) Keyboard/ •...
-
Page 47: Agency Notices
Agency Notices... - Page 48 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n F i v e...
-
Page 49: Regulatory Information
Regulatory Information C A U T I O N Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment NOTICE Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. - Page 50 Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecom- munication company cause to request the user to disconnect the equipment from the telephone line.
- Page 51 UL Notice This unit requires an AC adapter to operate. Use only UL Listed Class 2 Adapters with an output rating of 16 VDC, with a current of 3.75 A. AC Adapter output polarity: C A U T I O N The modem-to-telephone network connection must be a line cord using a minimum #26 AWG wire.
- Page 52 S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n F i v e...
-
Page 53: Appendix
Appendix Wireless LAN* User’s Guide * Optional device... - Page 54 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x...
-
Page 55: Wireless Lan User's Guide
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable oper- ation. Modifications not expressly authorized by Fujitsu PC Corporation may invalidate the user's right to operate this equipment. - Page 56 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x BEFORE USING THIS DEVICE Thank you for purchasing a Fujitsu ST4000P Series Pen Tablet PC with the optional Integrated Wireless LAN.
- Page 57 CONNECTING WINDOWS 2000 SYSTEMS This chapter describes how to set the wireless LAN connection for computers running Windows 2000. P O I N T If you pruchased a ST4000P Series Pen Tablet PC with the wireless LAN option, the integrated wireless LAN device and drivers have already been installed.
- Page 58 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x Item Description Create Keys...
- Page 59 5. Set an IP address as indicated in Table 3. Ask your network administrator to check the setting. Item Description For AdHoc Set the IP address and subnet mask: Network Click [Use the following IP address], and enter a value for [IP address] and [Subnet mask].
- Page 60 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x 5.
- Page 61 Item Description State Shows the current condition of connection. The MAC address of the other computer to which you are connected is displayed when the connection is successful. If you are connected to more than one computer, the computer that has the best connectivity is displayed.
- Page 62 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x Item Network Enter the network name to which you...
- Page 63 4. Check [Full computer name] and [Workgroup]. Ask your network administrator and check the setting. Item Description Computer A name to identify the computer on Name the network. You can specify any name to each computer. Use up to 15 single-byte characters.
- Page 64 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x 3.
-
Page 65: Troubleshooting
TROUBLESHOOTING This section contains troubleshooting information, including causes and actions, for problems you may find while using this device. Troubleshooting Table Problem Possible Cause An exclamation mark A failure to (!) or cross (x) is recognize the device. attached to [Intersil A failure in installing PRISM Wireless LAN the driver. - Page 66 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x Problem Possible Cause IP packet isn’t...
- Page 67 Problem Possible Cause I want to remove the driver (Windows 2000) W i r e l e s s L A N U s e r ’ s G u i d e Possible Solution Windows 2000: When removing the driver, make sure that the device is attached to the computer.
-
Page 68: About Ip Addresses
S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x Problem Possible Cause I want to remove... -
Page 69: Specifications
SPECIFICATIONS Technical Specifications for Integrated Wireless LAN Device Item Network Type Transfer Rate Frequency Range Channels Card Type Security Supported Operating Systems Power Current Maximum number of units recommended for wireless LAN (AdHoc network) W i r e l e s s L A N U s e r ’ s G u i d e Description IEEE 802.11b 11/5.5/2/1Mbps (auto change) - Page 70 S t y l i s t i c S T 4 0 0 0 P S e r i e s P e n T a b l e t P C U s e r ’ s G u i d e – A p p e n d i x...
-
Page 71: Index
External Monitor Connector .....6 Fujitsu Online ....... . .v Fujitsu PC Contact Information . - Page 72 S t y l i s t i c S T 4 0 0 0 P S e r i e s infrared keyboard port ..... . 3, 14 infrared keyboard/mouse port .
-
Page 73: Network Connection
care and maintenance ..... . . 29 features ......3, 4, 5, 6, 7 items included with . - Page 74 S t y l i s t i c S T 4 0 0 0 P S e r i e s...