Starting Your Tablet Pc; Power On; Boot Sequence; Warranty Registering For Your Fujitsu Stylistic Q507 - Fujitsu Stylistic Q507 User Manual

Starting Your Tablet PC

Power On

The Power/Suspend/Resume button is used
to turn on your Fujitsu STYLISTIC Q507 from
its off state. Once you have connected your
AC adapter or charged the internal Lithium Ion
Battery, you can power on your Tablet PC.
When you turn on your Tablet PC be sure
you have a power source. This means that
a battery is installed and charged, or that the
AC adapter is connected and has power.
Press the Power/Suspend/Resume button to
start your system. When you are done working
you can either leave your Tablet PC in Standby
mode, or you can turn it off.
When the system display is closed, the
Suspend/Resume button is disabled. This
feature prevents the system from being
accidentally powered up when not in use.
When you Power On your Tablet PC, it will
perform a Power On Self Test (POST)
to check the internal parts and configuration
for correct functionality. If a fault is found,
your Tablet PC will emit an audio warning
and/or an error
displayed. Depending on the nature of the
problem, you may
by starting the operating
entering the BIOS setup utility and revising
the settings.
After satisfactory completion of the Power On
Self Test (POST), your Tablet PC will load your
operating system.
Never turn off your Tablet PC during the
Power On Self Test (POST) or it will cause
an error message to be displayed when you
turn your Tablet PC on the next time.
16
message will
be able to continue
system or

Boot Sequence

The procedure for starting-up your Tablet PC
is termed the Bootup sequence and involves
your Tablet PC's BIOS. When your Tablet PC
is first turned on, the main system memory
is empty, and it needs to find instructions to
start up your Tablet PC. This information is
in the BIOS program. Each time you power
up or restart your Tablet PC, it goes through
a boot sequence which displays a Fujitsu
logo until your operating system is loaded.
During booting, your Tablet PC is performing a
standard boot sequence including a Power On
Self Test (POST). When the boot sequence
is completed without a failure and without a
request for the BIOS Setup Utility, the system
displays the operating system's opening
screen.
The boot sequence is executed when:
• You turn on the power to your Tablet PC.
• You restart your Tablet PC from the
Windows Shut Down Dialog box.
• The software initiates a system restart.
E x a m p l e : W h e n y o u i n s t a l l a n e w
application.
• You reset the system by pressing the
three keys [Ctrl+Alt+Del].
Warranty Registering for Your
Fujitsu STYLISTIC Q507
How do I register?
be
You can register your STYLISTIC by going to
our website:
by
http://solutions.us.fujitsu.com/www/
content/support/.
This helps us to better serve you.