System Interface Port; Figure 6-1 System Interface Port Connector (On Pen Tablet) - Fujitsu Stylistic 3500 Technical Reference Manual

System Interface Port

The system interface port on the Stylistic 3500 pen tablet allows you to attach the Stylistic 3500 port
replicator or mini-dock. The system interface port is a 200-pin connector. Figure 6-1 shows the pin
locations for the system interface port connector on the pen tablet.
Note: The connectors used for the system interface port are manufactured by JAE. Part numbers are:
female: KX20-200RG-F2LT, male: KX20-200BG-F2LT
LCD Side
50 50
49 49 48 47 48 47
100 99 98 97 100 99 98 97
150 149 148 147 150 149 148 147
200 199 198 197 200 199 198 197
Back Side
The pin assignments for the system interface port connector on the pen tablet are given in Table 6-6.
Signals designated with the "pound" (#) symbol are active low.
Note: • Signal names listed in the second column of this table are not industry standard signal names. They
are provided to assist in cross-referencing these signal names when they appear elsewhere.
• Signals provided on the system interface port duplicate signals for connectors on the pen tablet. Do not
use peripheral connectors on the pen tablet when using corresponding interfaces on the system
interface port.

Figure 6-1 System Interface Port Connector (On Pen Tablet)

4 4 3 3 2 2
54 54 53 53 52 52
104 103 102 101 104 103 102 101
154 153 152 151 154 153 152 151
System Interface Port
6
1 1
51 51
51