CPU Features Submenu
Options for the CPU Features submenu are given in Table 3-9.
Option
Processor Serial Number
Event Logging Submenu
The Event Logging Submenu allows you to configure DMI (Desktop Management Interface) event
logging options. To access this submenu, select Event Logging Submenu from the Advanced menu.
Option
Event Log Capacity
Event Log Validity
View Event Log
Event Logging
System Boot Event
Clear All Event Logs
Mark Events as Read
Table 3-9. CPU Features Submenu Options
Settings
Enabled
Disabled
Table 3-10. Event Logging Submenu Options
Settings
Enter
Disabled
Enabled
Disabled
Enabled
No
Yes
Enter
Description
This option configures the Processor Serial Number
feature of Pentium III processor. This option is
accessible via DMI.
When [Disabled] is selected, the Processor Serial
Number feature is disabled.
When [Enabled] is selected, the Processor Serial
Number feature is enabled.
Description
Status of the event log is displayed.
Indicates whether data in the event log is valid.
Press the <Enter> key or select the [Enter] option to
view the contents of the event log.
Determines whether DMI event logging is enabled.
This option is only available when [Enabled] is
selected for Event Logging.
When [Enabled] is selected, the event may be
logged.
When [Disabled] is selected, the event is ignored.
Choose [Yes] to clear all DMI event logs at the next
boot. (This setting is reset to No after the event logs
are cleared.)
Press [Enter] or press the <Enter> key to mark all
events currently in the event log as read. Marked
events will not be displayed the next time View Event
Log is selected.
BIOS Setup
3
3
17