Replacing The Ide Hard Disk Drive; Removing The Hard Disk Drive; Figure A-1: Ide Hard Disk Drive Cover Plate - Fujitsu Stylistic 3500 Technical Reference Manual

Hide thumbs Also See for Stylistic 3500:

Table of Contents

Appendix A

Replacing the IDE Hard Disk Drive

The internal IDE hard disk drive in the Stylistic 3500 pen tablet can be removed and replaced, if

necessary.

Observe the following guidelines when handling the hard disk drive:

• Do not attempt to disassemble or modify the hard disk drive.

• Do not remove any labels from the hard disk drive.

• HDD replacement should only be performed at a static-free workstation.

Avoid touching connector pins and circuit boards on the drive or pen tablet.

Electrostatic discharge caused by doing so can damage sensitive

components.

To remove the hard disk drive from the pen tablet,

1. Ensure that the pen tablet is off. To do so, carry out the Shut Down command in the Start menu.

2. Using a Phillips screw driver (size #1), remove the two screws in the hard disk drive cover plate and

remove it as shown in Figure A-1:.

Caution

Table of Contents