O
DAILY will sound every day at a specified time;
O
WEEKDAYS will sound Monday through Friday at same selected time;
O
WEEKENDS will sound Saturday and Sunday at the same selected
time; or
O
Once a week alarm (i.e., MON, TUES, WED...) will sound on a specified
day at a specified time.
10. Press STOP/RESET/SET (DONE) to save your changes and exit the
setting process.
Alarm Mode Notes & Tips
O
To turn an alarm ON or OFF without entering the setting state, press
START/SPLIT while in Alarm Mode.
O
If you change any alarm settings, you automatically turn the alarm on.
O
When you set the alarm, the alarm clock icon
display in Time of Day Mode.
O
While the alarm sounds, you can silence it by pressing any button.
O
The once a week alarm (i.e., MON, TUES, WED...) is especially useful
for reminding you about appointments.
O
If you do not silence the alarm before the alert finishes, a backup
alarm will sound after 5 minutes.
50
a
appears on the
This mode allows you to transfer your workout data to Timex
software when used with the optional Timex
INDIGLO
BUTTON
® ®
Press to light the watch,
activate/de-activate the
Night- Mode
®
feature.
MODE
Press to move to
the next mode.
START/SPLIT
Press to cancel the search
for or sync with a PC once
the sync process has begun.
NOTE: Once you have initiated the sync process, you can press any button
to cancel. You will see the message SYNC CANCEL. The watch will beep,
the receiver will shut down, and the watch will return to the SYNC READY
state.
Sync
®
Trainer
®
Data Xchanger USB device.
STOP/RESET/SET
Press to cancel the
search for or sync with
a PC once the sync
process has begun.
HEART RATE
Press to enable the
receiver and start
searching for a PC.
51
Need help?
Do you have a question about the Ironman Triathlon and is the answer not in the manual?
Questions and answers
how to change the a to a p on the face of the watch
To change the "A" to a "P" on a Timex Ironman Triathlon watch, follow these steps:
1. Enter the time-setting mode by pressing and holding the necessary button (likely MODE or SET) until the SECONDS begin flashing.
2. Press MODE to cycle through the settings until the HOURS are flashing.
3. Use the START/STOP button to adjust the hour. Continue advancing past 11 AM to switch from "A" (AM) to "P" (PM) in 12-hour format.
4. Once the correct time is set, press SPLIT/RESET/SET to exit the setting mode.
Ensure the watch is in 12-hour format; otherwise, switch between 12-hour and 24-hour formats using START/SPLIT (+) or HEART RATE (-).
This answer is automatically generated