Chrono; Chrono Terminology; To Operate The Chrono - Timex Ironman Triathlon User Manual

Digital heart rate monitor
Hide thumbs Also See for Ironman Triathlon:
Table of Contents

Advertisement

Available languages

Available languages

Chrono

Chrono Mode operates as the main workout data center for your watch. It
can record elapsed time for up to 100 hours. It can also record information
for up to 50 laps.
INDIGLO
® ®
BUTTON
Press to light the watch,
activate/de-activate the
Night- Mode
®
feature.
MODE
Press to move to the next
mode or quickly display
a new lap or split.
START/SPLIT
Press to begin timing, take
a lap or split, or continue
timing after a pause.

Chrono Terminology

O
Chronograph: The chronograph records timed segments for the
duration of your workout.
O
Lap: Lap time records the time or duration of individual segments of
your workout.
O
Split: Split time records the total elapsed time since the beginning of
your current workout.
18
O

To Operate the Chrono

1. Press MODE until CHRONO appears.
STOP/RESET/SET
Press to stop or pause the
2. Press and hold STOP/RESET/SET to save chrono data (if necessary)
chrono, save chrono data
and clear the chrono,
or change chrono format
3. Press START/SPLIT to begin timing.
4. Press START/SPLIT again to take a lap or split. The watch will display
HEART RATE
Press to switch
display views.
5. Press MODE to immediately display new lap or split information OR
6. Press STOP/RESET/SET to stop timing when you want to take a break
Taking a lap or split: When you take a lap or split, the
chronograph records the time for the current segment and
automatically begins timing a new one.
and reset the chrono.
the lap or split number and average heart rate (for the lap or split) if
receiving data from the Heart Rate Sensor.
wait a few seconds and the watch will automatically begin to display
data for a new lap or split.
or you reach the end of your workout.
NOTE: The recovery heart rate timer will begin automatically (for 30
seconds or 1-, 2-, 5-, or 10-minutes, as user-specified) after pressing
STOP/RESET/SET if the watch is receiving data from the Heart Rate
Sensor. For more information about recovery heart rate, see pages
33 to 35.
19

Hide quick links:

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ironman Triathlon and is the answer not in the manual?

Questions and answers

Mary K Schnopp
March 20, 2025

how to change the a to a p on the face of the watch

1 comments:
Mr. Anderson
March 20, 2025

To change the "A" to a "P" on a Timex Ironman Triathlon watch, follow these steps:

1. Enter the time-setting mode by pressing and holding the necessary button (likely MODE or SET) until the SECONDS begin flashing.
2. Press MODE to cycle through the settings until the HOURS are flashing.
3. Use the START/STOP button to adjust the hour. Continue advancing past 11 AM to switch from "A" (AM) to "P" (PM) in 12-hour format.
4. Once the correct time is set, press SPLIT/RESET/SET to exit the setting mode.

Ensure the watch is in 12-hour format; otherwise, switch between 12-hour and 24-hour formats using START/SPLIT (+) or HEART RATE (-).

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF