Show Privilege; Show Running-Config - Zte ZXR10 Command Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Function
Command Mode
Format
Syntax
Description
show run

show privilege

Use this command to display the current terminal authority level
and command authority configuration information.
All modes
show privilege [{cur-mode | show-mode}{detail | level <
level>| node <command-keywords>}]
cur-mode
show-mode
detail
level <level>
<command-keywor
ds>
The command show privilege in EXEC mode is without parame-
ters .
This example describes how to display all commands that authority
level is 6 in privileged mode.
ZXR10#show privilege cur-mode level 6
privilege

show running-config

Use this command to display the current configuration information
of the system or a specified interface.
All modes except exec
show running-config [interface <interface-name>| voice-p
ort <voice-port>]
show running-config [{begin | exclude | include}<line>
interface <interface-
name>
voice-port
<voice-port>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Basic System Management
Displays the current command mode authority
information.
Displays show command mode authority
information.
Displays all commands authority level.
Displays specified authority level command.
Displays specific command authority level.
Interface name
Voice interface name, only supporting the
GAR with the tone board
27