Zte ZXR10 Command Manual page 86

ZXR10 Command Manual (Basic Configuration Volume I)
Syntax
Description
Instructions
Example
76 Confidential and Proprietary Information of ZTE CORPORATION
num
mp
<1~2>
rp
<1~2>
sp
<1~2>
np
<1~num>
� This command display the resource statistics of the specified
CPU, such as the CPU utilization (at 5 s, 1 minutes, 5 minutes
period), memory size, memory utilization and system buffer
utilization.
� This command display the resource statistics of the specified
CPU, such as the CPU utilization (at 5 s, 1 minutes, 5 minutes
period), memory size, memory utilization and system buffer
utilization.
This example describes how to display the resource statistics in-
formation of mp 1.
ZXR10(config)#show process mp 1
M: Master processor
S: Slave processor
PhyMem: Physical memory (megabyte)
Panel CPU(5s) CPU(1m) CPU(5m)
MP(M) 1 17% 17%
The displayed information is described below.
Panel
CPU(5s)
CPU(1m)
CPU(5m
PhyMem
Buffer
Memory
The maximum number of each board, vary
with rack type. In order to obtain the number
of MP boards, execute show processor mp.
The value of num is displayed.
Resource statistics information of mp
mp slot no.
Resource statistics information of rp
rp slot no
Resource statistics information of sp
sp slot no
Resource statistics information of np
np slot no.
PhyMem Buffer
16% 512 0%
Panel number where the board locates
CPU utilization at 5 s period
CPU utilization at 1 minute period
CPU utilization at 5 minute period
Physical memory size (mb)
System buffer utilization
Memory utilization
Memory
55.585%