Zte ZXR10 Command Manual page 122

ZXR10 Command Manual (Basic Configuration Volume I)
Syntax
Description
Instruction
Example
112 Confidential and Proprietary Information of ZTE CORPORATION
oute-IP-address>}| record <record-hops>| timestamp <record
-timestamps>| none}}]
<key number>
vrf <vrf-name>
repeat<repeat-cou
nt>
size <datagram-size>
timeout<timeout>
source<source-addre
ss>
tos<tos>
ttl<ttl>
df-bit<don't-frag>
pattern <pad>
limite<limite-num>
option
none
{loose | strict}<sour
ce-route-IP-address>
record <record-ho
ps>
timestamp
<record-timestamps>
The ping command will send the ICMP Echo packet. If the desti-
nation receives an ICMP Echo message, it will send an ICMP Echo
Reply message to the source address of the Echo message. As a
result, this command is used to diagnose network interconnection.
This example describes how to check whether 168.1.10.10 is
reachable.
ZXR10#ping 168.1.10.100
sending 5,100-byte ICMP echos to 168.1.10.100,timeout is 2 seconds.
!!!!!
Success rate is 100 percent(5/5),round-trip min/avg/max= 0/8/20 ms.
IP address of the host to be checked, in the
dotted decimal notation
VRF of the IP address, 1 ~ 16 characters
Times of repeated tests, 1 ~ 4294967295,
5 by default
Size of the Ping packet, 36 ~ 8192 bytes, 100
by default
Timeout in second, 1 ~ 60
Source address in the dotted decimal notation
Service type of the packet to be sent, 0 ~
255, 0 by default
ttl value, 1 ~ 255
Fragment tag, 0 or 1. 0 by default, which
means no fragment
The pad field value in message
Number of packets sent in one second
Whether to set IP option, when 1 is set, IP
option can be set
No IP option is necessary, and it is the default
value
Specified source site routing path, in the
dotted decimal notation
Maximum number of routes to be recorded, 1
~ 9, 9 by default
Maximum timestamps to be recorded, 1 ~ 9