Who - Zte ZXR10 Command Manual

Syntax
Description
�
Instructions
�
�
�
Example
�
show user-group
Related
Commands
username

who

Use this command to display the list of the current login users.
Function
Privileged
Command Mode
who
Syntax
This example describes how to display the list of the current login
Example
users.
ZXR10#who
Line
* 66 vty 0
67 vty 1
The descriptions of the result fields are displayed below.
default
special
<usergroup-name>
<username>
<password>
The public account group can also be configured with the user
name command with the same effect.
Here, account group name and account name is not case-sen-
sitive, but password is case-sensitive.
This command is only applicable to ZXR10 GARZXR10 ZSR.
This example describes how to configure a public account
group,
ZXR10(config)#user-group default who who
This example describes how to configure the user account of
the private account group zxr10.
ZXR10(config)#user-group special zxr10 who who
User Host(s)
who idle
abc idle
Field
Line
User
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Basic System Management
Specifies to configure the public account
group
Specifies to configure the private account
group
Name of the private account group, with
1~16 characters
Account name, with 1~16 characters
Account password, with 3~16 characters
Idle Location
00:00:00 168.1.200.57
00:00:00 168.1.200.58
Description
Number of the virtual terminal with the user
login
Login user name
35