Reload; Service Password-Encryption - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Function
Command Mode
Format
Instruction

reload

Use this command to reboot the system or reset the board in a
specific slot.
Privileged EXEC
reload [slot <slot-number>| sfc <slot-number >| mp slave]
reload [mp slave][force]
<slot-number>
sfc <slot-number>
mp slave
force
� The platform version 4.6.02 and upgrade versions support this
command.
�
The command without parameter is used to reboot the whole
system.
� The command with parameter slot is used to reset the board
in a specific slot.
� The command with parameter sfc is used to reset a specific sfc
board.
� This example describes how to reset the card in slot 3.
ZXR10#reload slot 3
Proceed with reload? [yes/no]:y
ZXR10#
� This example describes how to reset the right sfc.
ZXR10#reload sfc 2
Proceed with reload? [yes/no]:y
ZXR10#
� This example describes how to reset the slave MP.
ZXR10#reload mp slave
Proceed with reload? [yes/no]:y
ZXR10#

service password-encryption

Use this command to set user password encryption display func-
tion.
Global configuration mode

service password-encryption

no service password-encryption
All user password display in encryption after this command is con-
figured.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Basic System Management
Slot number, in the range of 1~8.
Flag of sfc (1: left sfc; 2 right sfc).
Restarts the slave board.
Restarts the device or slave board by force.
21