Show History; Show Terminal - Zte ZXR10 Command Manual

All modes except exec
Command Mode
show console-info
Syntax
It is only applicable to ZXR10 GER, ZXR10 GAR and ZXR10 ZSR.
Instruction

show history

Use this command to display the history records of the input com-
Function
mands. It can be used to view the commands entered before.
All
Command Mode

show history

Syntax
This command can be used to view the commands entered re-
Instruction
cently, 10 at most.
This example describes how to view the commands entered re-
Example
cently.
ZXR10>show history
who
show ip route
en
dir

show terminal

Use this command to display the status of the current user termi-
Function
nal.
All
Command Mode

show terminal

Syntax
This command can be used to view the information of the login
Instruction
terminal, including the terminal number, terminal type, and termi-
nal window size and login restrictions.
This example describes how to view the information of the current
Example
login terminal.
ZXR10#show terminal
Line 66, Location: "", Type: "vt100"
Length: 24 lines, Width: 80 columns
Telnet idle-timeout is: 02:00:00
Telnet absolute-timeout is: 1d00h00m
Baud rate (TX/RX) is 9600/9600
Capabilities: none
Time since activation: 00:07:55
Editing is enabled.
History is enabled, history size is 10.
Telnet access-class is: 2
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 User Interface Management
55