ZXR10 Command Manual (QoS Volume)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
84
Confidential and Proprietary Information of ZTE CORPORATION
�
If the users specify policy-map and [<policy-map-name>] the
system only shows the interfaces which binds with the specified
policy-map.
�
This command is applied to ZXR10 T64E/T128.
This example describes how to show all bound policy_map inter-
faces.
ZXR10(config)#show qos interface policy-map
priority-group
service-policy
show qos queue-statistics
Use this command to show the statistics information of queuing
policy on the interface. Queue policy includes PQ, WRED and CB-
WFQ.
All modes except user EXEC
show qos queue-statistics [<interface-name>]
<interface-name>
�
The platform versions 4.8.21 and upgrade version support this
command.
�
This command is applied to ZXR10 T64E/T128 and ZXR10
T600/T1200.
�
This example describes how to display the statistic information
of queue policy on interface fei_4/1.
ZXR10(config)# show qos queue-statistics fei_4/1
�
This example describes how to display the statistic information
of queue policy on all interfaces.
ZXR10(config)# show qos queue-statistics
show queue statistic
Use this command to display the operation state of QoS policy on
the interface.
All modes except user EXEC
show queue statistic [<interface-name>]
(Optional) The interface name needs to
display. When this command is used with the
parameter, the information of the specified
interface is shown; without the parameter,
the information of all the interfaces is shown.