ZXR10 Command Manual (QoS Volume)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Related
Commands
Purpose
62
Confidential and Proprietary Information of ZTE CORPORATION
priority-group
priority-queue
Use this command to configure policy priority-queue. Cancel the
settings with the no command.
Policy class configuration
priority-queue {high | medium | normal | low}
no priority-queue
high | medium |
normal | low
ZXR10 T64E/T128 does not support this command.
This example describes how to set high priority queue for class_1
in policy mapping named policy_1.
ZXR10(config)#policy-map policy_1
ZXR10(config-pmap)#class class_1
ZXR10(config-pmap-c)#priority-queue high
policy-map
show policy-map
qos ip
Use this command to enable the QoS function. Disable the function
with the no command.
Global configuration
qos ip
no qos ip
This command is applied to ZXR10 GAR, ZXR10 GER, ZXR10
T64E/T128 and ZXR10 ZSR.
This example describes how to enable the QoS function.
ZXR10(config)#qos ip
qos enable
qos-map
Use this command to configure pipe, short-pipe and uniform mode.
Cancel the settings with the no command.
Defines priority-queue.