Show Qos Config Vrf; Show Qos Interface - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions

show qos config vrf

Use this command to the configuration information of QoS on L3
VPN interface.
Privileged EXEC
show qos config vrf <vrf-name><interface-name>
<vrf-name>
<interface-name>
The QoS configuration information of the interface which belongs
to this VRF is shown.
� The VRF has to be created before.
� This command is applied to ZXR10 T64E/T128 and ZXR10
T600/T1200.
This example describes how to display the QoS configuration on
interface fei_4/1 which belongs to vrf_1.
ZXR10(config)#show qos config vrf vrf_1 fei_4/1

show qos interface

Use this command to show all interfaces that apply Qos policy.
All modes except user EXEC
show qos interface [pq [<list-no>]| policy-map [<policy-map
-name>]]
<list-no>
<policy-map-name>
� If the users do not specify pq [<list-no>] and policy-map <pol
icy-map-name> , the system shows all interfaces with PQ and
policy-map.
� If the users specify pq but without [<list-no>] , the system
only shows the interfaces which binds with PQ.
� If the users specify pq but without [<list-no>] , the system
only shows the interfaces which binds with the specified list
number.
� If the users specify policy-map but without [<policy-map-nam
e>] , the system only shows the interfaces which binds with
policy-map.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 QoS configuration(Router Series)
VRF name that has been configured
Interface name to be specified
(Optional) PQ list number
(Optional) Policy mapping name
83