Scenes And Tours - Bosch Starlight 7000 HD Operation Manual

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Controls the wiper of the MIC cameras. Options are:
–
–
–
–
Wiper/washer
Click Start to start the wiper/washer. Click Stop to stop the wiper/washer.
15.19

Scenes and Tours

The camera can store up to 256 preset scenes. You can define the individual scenes that
comprise a preposition tour.
You define individual preposition scenes, then use these scenes to define the preposition tour.
The tour starts from the lowest scene number in the tour and progresses sequentially to the
highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the preposition tour unless removed.
To define and edit an individual scene:
1.
2.
3.
4.
5.
6.
7.
8.
9.
To define a preposition tour:
1.
2.
3.
4.
Bosch Security Systems
Off: Turns off the wiper.
On: Wiper wipes continuously until deactivated manually, or until it has been on for five
minutes (after which the camera will stop the wiper automatically).
Intermittent: Wipes twice, then stops. Every 15 seconds, this cycle repeats until users
select another option in this field.
One shot: Wipes five times, then turns off.
Click the View Control link.
Use the PTZ controls to move the camera into position.
Navigate to the scene that you want to define as a preposition.
Click the Add scene ("+") button to define the preposition.
Select a number for the scene, from 1 to 256.
Type an optional name for the scene, up to 20 characters long.
Click OK to save the scene to the Preposition list.
The asterisk (*) to the left of the scene name indicates the scene is part of the
preposition tour.
To delete a scene from the list, select the scene and click the Delete scene ("X") button.
To overwrite an existing scene:
Click the View Control link to access the PTZ controls.
Use the PTZ controls to navigate to the new scene.
Click the scene in the Preposition list you want to overwrite.
Click the Overwrite scene button to apply the new scene to the existing preposition.
To change the name of the scene, double-click the scene in the list. Then, change the
name in the Edit Scene dialog box and click OK.
To view a scene in the preview window, select the scene in the list and click the Show
scene button.
To view a scene from the LIVE page:
Click a scene number below the PTZ controls on the View Control tab.
OR
Use the keypad and the Show Shot button on the Aux Control tab.
Create the individual scenes.
By default, all scenes in the Preposition list are in the preposition tour.
To remove a scene from the tour, select the scene in the list and uncheck the Include in
standard tour box.
Select a dwell time from the Standard preposition tour drop-down list.
To start the preposition tour:
Operation Manual
Configuration via IP, Advanced Mode | en
2014.09 | 1.3 | F.01U.291.520
63