Camera Connections - Bosch Starlight 7000 HD Operation Manual

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
10.4

Camera Connections

All electrical and data connections from the camera are made from the connectors in the base
of the camera.
Figure 10.1: MIC7000 connectors
1 RJ45 (Cat5e/Cat6) connector (male) (supporting High PoE) for power and
communication between a Bosch model of High PoE Midspan or a VJC-7000-90
2 24 VAC power wires (24 gage) to VG4-A-PSU1 or VG4-A-PSU2 (if not using a PoE
network)
3 Chassis (Earth) ground wire (18 gage) with connector lug
4 RS-485 connections for communication to / from the MIC-ALM-WAS-24
5 Liquid-tight cordgrip in the base of the camera
6 RJ45 coupler (female to female)
Note: If the MIC camera will be installed directly to a mounting surface, instead of onto a MIC
DCA or a MIC wall mount bracket, Bosch recommends using the optional IP67 Weatherization/
Connector Kit (MICIP67-5pk, sold separately) to protect the connections against moisture and
dust particles. Each kit provides components for connecting up to five (5) MIC cameras. Refer
to the manual provided with the kit for installation instructions.
Bosch Security Systems
Description
Operation Manual
Make Connections - Power and Control | en
Wire Color
Line (L) = Black
Neutral (N) = White
Green
+ = Purple
- = Yellow
GND = Brown
2014.09 | 1.3 | F.01U.291.520
27