Overview Of Installation Steps - Bosch Starlight 7000 HD Operation Manual

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
4

Overview of Installation Steps

The following figure identifies the steps to install a MIC7000 camera.
To install your MIC camera, follow these steps in sequence.
Note: Depending on your model of camera, your desired mounting location and orientation, as
well as your mounting brackets and chosen camera accessories, you may not need to
complete every step.
Bosch Security Systems
Determine system
Identify Mounting Site Requirements.
Select mounting
Identify required
location and
mounting accessories.
orientation.
(Refer to Section 8.)
(Refer to Section 7.)
Install optional accessories.
Alarm/Washer VIDEOJET connect
Interface Unit
(Refer to individual installation manuals.)
Install cabling between power
source and camera mounting site.
Install MIC Camera.
(Refer to Section 9.)
Connect network cable
(Refer to Section 10.)
YES
Cant the camera.
(Refer to Section 11.)
Configure settings.
(Refer to Section 13.)
Operate the camera.
(Refer to Section 16.)
configuration.
Connect and configure
Pre-
YES
configure
camera?
(Refer to Sections 5 & 6.)
NO
Install mounting
accessories and
conduit (if applicable).
Power supply source
PSU or PoE device
Install
optional YES
Install
camera
illuminator.
access-
ories?
NO
Install a
sunshield?
Will
camera
be canted?
NO
Operation Manual
Overview of Installation Steps | en
camera in box or
on table-top stand.
YES
Install
sunshield.
NO
2014.09 | 1.3 | F.01U.291.520
15