Scenes And Tours - Bosch AUTODOME 7000 VG5-7230 Operation Manual

AUTODOME 7000
Auto pan right limit
Sets the right Auto Pan limit of the camera. Use the preview window to move the camera to
the right pan limit and click the button. The camera will not move past this limit when in Auto
Pan Between Limits mode (AUX 2 ON).
Tilt up limit
Sets the upper tilt limit of the camera. Use the preview window to move the camera to the tilt
limit and click the button.
Tilt limits
Click the Reset button to clear the upper tilt limit.
Tour A / Tour B
Starts and stops the recording of a recorded (guard) tour.
The camera can make up to two (2) recorded tours. A recorded tour saves all manual camera
movements made during the recording, including its rate of pan, tilt and zoom speeds, and
other lens setting changes. The tour does not capture camera video during the recording of
the tour.
Note 1: You can save a total of 15 minutes of recorded actions between the two tours.
To record a tour:
1.
2.
3.
4.
5.
North point
Click the Set button to overwrite the existing North point.
Click the Defaults button to reset the North point to factory defaults.
14.18

Scenes and Tours

The camera can store up to 256 preset scenes. You can define the individual scenes that
comprise a preposition tour.
You define individual preposition scenes, then use these scenes to define the preposition tour.
The tour starts from the lowest scene number in the tour and progresses sequentially to the
highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the preposition tour unless removed.
To define and edit an individual scene:
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems, Inc.
Click the Start Recording button. The system prompts you to overwrite the existing tour.
Click Yes to overwrite the existing tour movements.
Click the View Control link, under the image cameo, to access the directional and zoom
controls.
Use the View Control dialog box to make the necessary camera movements.
Click the Stop Recording button to save all actions.
Click the View Control link.
Use the PTZ controls to move the camera into position.
Navigate to the scene that you want to define as a preposition.
Click the Add scene ("+") button to define the preposition.
Select a number for the scene, from 1 to 256.
Type an optional name for the scene, up to 20 characters long.
Click OK to save the scene to the Preposition list.
The asterisk (*) to the left of the scene name indicates the scene is part of the
preposition tour.
To delete a scene from the list, select the scene and click the Delete scene ("X") button.
To overwrite an existing scene:
Click the View Control link to access the PTZ controls.
Use the PTZ controls to navigate to the new scene.
Operation Manual
Configuration via IP, Advanced Mode | en
2014.04 | 2.0 | F.01U.283.679
105