MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Figure 11.3: Remove screws from yoke arms
Notice!
Risk of damage to the device.
Carefully support the head of the camera while completing the next three (3) steps.
3. Repeat step above for the second arm.
4. Carefully rotate the arms and head assembly forward.
Notice!
Risk of damage to the device.
Do not cant the camera, or let it fall, in the wrong direction! The camera should cant only in
the direction indicated in the figure directly below.
Bosch Security Systems
T27 Torx
Operation Manual
Cant the Camera | en
31
2014.09 | 1.3 | F.01U.291.520