Encoder Streams - Bosch Starlight 7000 HD Operation Manual

Mic ip starlight 7000 hd / mic ip dynamic 7000 hd series
Hide thumbs Also See for Starlight 7000 HD:
Table of Contents

Advertisement

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
compression and thus the image quality for every frame. The lower the quantization of the P-
frame (QP value), the higher the encoding quality (and thus the best image quality) and the
lower the frame refresh rate depending on the settings for the maximum data rate under
network settings. A higher quantization value results in low image quality and lower network
load. Typical QP values are between 18 and 30.
The basic setting Auto automatically adjusts the quality to the settings for the P-frame video
quality.
I/P-frame delta QP
This parameter sets the ratio of the I-frame quantization (QP) to the P-frame quantization
(QP). For example, you can set a lower value for I-frames by moving the slide control to a
negative value. Thus, the quality of the I-frames relative to the P-frames is improved. The total
data load will increase, but only by the portion of I-frames. The basic setting Auto
automatically adjusts to the optimum combination of movement and image definition (focus).
To obtain the highest quality at the lowest bandwidth, even in the case of increased
movement in the picture, configure the quality settings as follows:
1.
2.
3.
Default
Click Default to return the profile to the factory default values.
15.13

Encoder Streams

Property
Select one of the H.264 standards for each stream.
Stream 1 (recording)
Note: In order to select the option "H.264 MP 720p50/60 Fixed" here, you must set the Max.
frame rate field in the Advanced Mode: Camera >Installer Menu to "H.264 MP 720p50/60
Fixed" first.
Bosch Security Systems
Observe the coverage area during normal movement in the preview images.
Set the value for Min. P-frame QP to the highest value at which the image quality still
meets your needs.
Set the value for I/P-frame delta QP to the lowest possible value. This is how to save
bandwidth and memory in normal scenes. The image quality is retained even in the case
of increased movement since the bandwidth is then filled up to the value that is entered
under Maximum bit rate.
Options are:
- H.264 MP SD
- H.264 MP 720p25/30 Fixed
- H.264 MP 1080p25/30 Fixed;
- H.264 MP 720p50/60 Fixed
Operation Manual
Configuration via IP, Advanced Mode | en
2014.09 | 1.3 | F.01U.291.520
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents