Bosch Starlight 7000 HD Operation Manual page 59

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
AE-response speed
Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium
(default), Fast.
Sharpness
Adjusts the sharpness of the picture. To set the sharpness, use the slider to select a number.
The default is 12.
Shutter Mode
–
–
Shutter
Adjusts the electronic shutter speed (AES). Controls the time period for which light is
gathered by the collecting device. The default setting is 1/60 second for NTSC and 1/50 for
PAL cameras. The range of settings is from 1/1 to 1/10000.
Auto SensUP limit
This limits the integration time when Auto SensUP (Frame Integration) is active. The default is
1/4. The range of settings is from 1/4 to 1/30.
Shutter limit
The camera tries to hold this shutter value as long as sufficient ambient light is available in the
scene.
Settings range from 1/1 to 1/10000. The default value is 1/2000 for all modes except 'Motion'
(default 1/500).
Backlight compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of the
image. The default setting is Off.
High Sensitivity
Adjusts the level of intensity or lux within the image (HD only). Select from Off or On.
Stabilization
Stabilization reduces camera shake in both the vertical and horizontal axis. The camera
compensates for the movement of the image by up to 2% of the image size. This feature is
ideal for cameras mounted on a pole or mast, or on another location that shakes frequently.
–
–
–
High dynamic range
Select On to activate wide dynamic range, which improves image reproduction in extreme
high-contract scenes.
Select Off to deactivate the feature.
Night mode
Selects night mode (B/W) to enhance lighting in low light scenes. Select from the following
options:
–
–
Bosch Security Systems
Fixed: The shutter mode is fixed to a selectable shutter speed.
AutoSensUp: increases camera sensitivity by increasing the integration time on the
camera. This is accomplished by integrating the signal from a number of consecutive
video frames to reduce signal noise.
If you select this option, the camera makes the following change automatically:
– Auto Iris: switches to Constant
– Shutter: is disabled
On - Stabilization is always on.
Off - Stabilization is disabled.
Auto - Stabilization activates automatically when the camera detects vibration greater
than the set threshold.
Monochrome: Forces the camera to stay in Nigh Mode and transmit monochrome images.
Color: The camera does not switch to Night Mode regardless of ambient light conditions.
Operation Manual
Configuration via IP, Advanced Mode | en
2014.09 | 1.3 | F.01U.291.520
59