Bosch Starlight 7000 HD Operation Manual page 92

92 en | Operation
1
2
3
4
5
6
7
8
To Enter a Keyboard Control Command:
1.
2.
3.
4.
To Set a Preset Shot:
Preset shots (or scenes) are camera positions that are saved in memory for future use.
1.
2.
3.
4.
To View a Preset Shot:
1.
2.
Notice!
For more information about the camera settings and controls, click the Help on this page?
link to open the online help.
2014.09 | 1.3 | F.01U.291.520
Command number field
Keypad (numbers 0-9)
Show a preset scene
Set a preset scene
Initiates a command
Deletes a number in the Command Number field
Used to select a menu item
Stops a command
Place the cursor in the Command Number field.
Click the desired command number via the on-screen keypad.
Click either the Aux on button or the Aux off button to initiate or stop the command.
If the command initiates a menu, use the Up/Down arrows on the View Control to
navigate the menu. Click the Focus button or Iris button to select a menu item.
Move your cursor over the live image and wait for the area to display a directional arrow.
Click and hold a mouse button to pan to the desired position that you want to save.
Click any number combination from 1-256 from the on-screen keypad to identify the
scene number.
Click the Set scene button. The image area displays a message that indicates which shot
number was saved.
Click the number of the scene you want to view using the on-screen keypad.
Click the Show scene button.
Operation Manual
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Bosch Security Systems