Bosch Starlight 7000 HD Operation Manual page 58

58 en | Configuration via IP, Advanced Mode
–
–
–
–
–
Customize the mode, if necessary, for the specific requirements of the site by selecting
different values for the fields below.
In this case, the name of the user mode changes to "Custom."
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
–
–
–
–
–
–
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Saturation
The percentage of light or color in the video image (HD only). Values range from 60% to 200%;
the default is 110%.
Color hue
The degree of color in the video image (HD only). Values range from -14° to 14°; the default is
8°.
Gain control
Adjusts the automatic gain control (AGC).
–
–
Fixed Gain
Use the slide to select the desired number for fixed gain. The default is 2.
Maximum Gain Level
Controls the maximum value the gain can have during AGC operation. To set the maximum
gain level, choose from:
–
–
–
2014.09 | 1.3 | F.01U.291.520
General – Default mode. Suitable for most applications.
Low light – Optimized performance for scenes with low light level.
Motion – Optimized to minimize motion artifacts, such as when monitoring traffic or fast-
moving objects.
Vibrant – Provides enhanced contrast, color reproduction, and sharpness.
Illuminator – Optimized performance when using the MIC illuminator accessory.
ATW: allows the camera to continuously adjust color reproduction.
AWB Hold: places the ATW on hold and saves the color settings.
Extended ATW (default): allows the camera to constantly adjust for optimal color
reproduction.
Manual: Red and Blue gain can be manually set to a desired position.
Sodium Lamp Auto: Automatically adjusts for sodium vapor light to restore objects to
their original color.
Sodium Lamp: Optimizes the sodium vapor light to restore objects to their original color.
AGC (default): Automatically adjusts the gain to the lowest possible value needed to
maintain a good picture.
Fixed: no enhancement. This setting disables the Max. Gain Level option.
If you select this option, the camera makes the following changes automatically:
– Night Mode: switches to Color
– Auto Iris: switches to Constant
Normal
Medium
High (default)
Operation Manual
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Bosch Security Systems