Diagnostics; System Overview - Bosch Starlight 7000 HD Operation Manual

88 en | Configuration via IP, Advanced Mode
Notice!
The activation key cannot be deactivated again and is not transferable to other units.
15.54

Diagnostics

BIST
Accesses the Built-in Self Test (BIST). The BIST displays a Pass or Fail status on the most
recent homing event.
Click the Start BIST button to initialize the BIST.
Logs
This section updates automatically with the history of the camera and maintains a log of all
events such as those listed below. Click the REFRESH button to reload log data.
–
–
–
–
–
–
–
–
–
–
15.55

System Overview

The data on this page are for information purposes only and cannot be changed. Keep a
record of this information in case technical assistance is required.
Notice!
You can select all required text on this page with the mouse and copy it to the clipboard with
the [Ctrl]+[C] key combination, for example if you want to send it via e-mail.
Some devices ship with labels that identify the unique MAC address of each network device.
The number on these labels matches the number in the MAC address field of the System
Overview for each device. Bosch recommends that you keep the MAC address labels in a safe
place for future reference.
2014.09 | 1.3 | F.01U.291.520
Low voltage - a drop in incoming power below the level where the camera becomes non-
functional
High temperature - the internal temperature exceeds specifications
Low temperature - the internal temperature exceeds minimum levels
High humidity - the internal humidity exceeds 70%
High vibration - the acceptable level of acceleration forces was exceeded
Total hours of camera operation
Illuminator aging history
homing events
power cycles (restarts)
video loss
Operation Manual
MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
Bosch Security Systems