Installation; Overview Of Installation Steps - Bosch VEI-Series User Manual

18 en | Installation
4

Installation

CAUTION!
Installation must be made by qualified service personnel and
must conform to the National Electrical Code and all applicable
local codes.
WARNING!
IMPORTANT MOUNTING INSTRUCTIONS
The camera must be attached securely to the wall in
accordance with these installation instructions. Failure to
follow installation instructions may result in injury or death.
The camera has been evaluated for wall mounting, through the
mounting holes in the junction box, using the following
hardware secured into a 2 x 4 stud under 1/2 in. drywall:
–
–
The camera has not been evaluated for safety requirements
using other mounting kits.
4.1

Overview of Installation Steps

Follow these steps in sequence to mount the camera to a wall:
1.
2.
3.
F.01U.263.417 | 3.0 | 2012.01
Four (4) Lag bolts, 1/4-9 x 2 (M7-0.35 x 50) with 1/2 in.
head
Four (4) 12 mm (1/2 in.) flat washers
Mount the junction box. See Section 4.2 Mount the
Junction Box, page 19.
Route wires and attach connectors for power, telemetry,
and video. See Section 4.3 Route Wires and Attach
Connectors, page 20.
Attach pendant arm to junction box. See
Section 4.4 Attach Pendant Arm to Junction Box, page 23.
User Manual
Dinion Infrared Imager
Bosch Security Systems, Inc.