Table of Contents
Advertisement
16
en | Installation
3
Installation
CAUTION!
Installation must be made by qualified service personnel and
must conform to the National Electrical Code and all
applicable local codes.
WARNING!
IMPORTANT MOUNTING INSTRUCTIONS
The camera must be attached securely to the wall in
accordance with these installation instructions. Failure to
follow installation instructions may result in injury or death.
The camera has been evaluated for wall mounting, through
the mounting holes in the junction box, using the following
hardware secured into a 2 x 4 stud under 1/2 in. drywall:
–
–
The camera has not been evaluated for safety requirements
using other mounting kits.
3.1
Overview of Installation Steps
Follow these steps in sequence to mount the camera to a wall:
1.
2.
3.
4.
5.
AM18-Q0663 | 1.0 | 2013.09
www.a1securitycameras.com email: sales@a1securitycameras.com
Four (4) Lag bolts, 1/4-9 x 2 (M7-0.35 x 50) with 1/2 in.
head
Four (4) 12 mm (1/2 in.) flat washers
Select tilt and width of illumination beam.
Unattach the junction box.
Mount the junction box.
Route wires and attach connectors.
Attach camera to junction box.
Installation manual
Available from A1 Security Cameras
DINION imager 9000 HD
Bosch Security Systems
Advertisement
Table of Contents
