Installation; Overview Of Installation Steps; Canting The Camera - Bosch MIC 550 Series Installation And User Manual

Hide thumbs Also See for MIC 550 Series:
Table of Contents

Advertisement

16
en | Installation
5

Installation

5.1

Overview of Installation Steps

Follow these steps in sequence to install the MIC-550 camera.
Note: Depending on your desired mounting position and location, as well as your chosen
accessories, you may not need to complete every step.
1.
2.
3.
4.
5.
6.
7.
5.2

Canting the Camera

The MIC-550 features twist-lock on-site canting functionality. This allows the camera to be
installed upright (90°), inverted, or canted (45º) to achieve the perfect field of view. Installers
can adjust the camera from an upright position to a canted position if desired.
The following graphic shows the camera in both upright and canted positions.
Figure 5.1 MIC-550 cameras (from left: Front view, canted (1); Front view, upright (2); Side view, upright
(3); Side view, canted (4))
To cant the camera, follow these steps:
1.
2.
F.01U.239.454 | 1.0 | 2011.04
Cant the camera. See Section 5.2 Canting the Camera, page 16.
Reverse the rain shield (for cameras mounted in inverted position). See
Section 5.3 Adjusting the Rain Shield for Inverted Operation, page 17.
Mount the camera. See Section 5.4 Mounting the Camera, page 18.
Mount the power supply unit (PSU). See the MIC Series Power Supplies Installation
Manual that came with the PSU (sold separately from the camera).
Make the necessary connections for power, telemetry, and video. See
Section 5.6 Electrical Connections, page 20.
Connect the camera to the computer. See Section 6 Getting Started.
Configure the camera for inverted operation (for cameras mounted in inverted
position). See Section 6.6 Configuring the Camera for Inverted Operation, page 28.
Firmly secure the camera base by the 4-inch PCD foot bolts.
Locate and remove the two (2) pan body fixing screws (identified by arrows in Figure 5.2
below). Once the screws have been loosened, lift them up and continue turning to lock
the screws open. Ensure not to damage the paint work on the camera.
Installation Manual
MIC Series 550 Camera
Bosch Security Systems, Inc.

Advertisement

Table of Contents
loading

Table of Contents