Debug Time-Range; Periodic - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume III)
Purpose
Command Modes
Syntax
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
26 Confidential and Proprietary Information of ZTE CORPORATION

debug time-range

Use this command to print the system time, the name of TimeRa
nge and the former state, the next state and so on when the state
of TimeRange is changed.
Privileged EXEC
debug time-range [change-to active | inactive]
change-to
active
inactive
This example describes how to print the TimeRange list information
which the input state changes from inactive to active.
ZXR10#debug time-range change-to active
ZXR10#terminal monitor
ZXR10#
show time-range
time-range

periodic

Use this command to configure periodic time range. Delete the
periodic time range with the no command.
TimeRange configuration
periodic <days-of-week hh:mm:ss> to [days-of-week]<hh:m
m:ss>
no periodic <days-of-week hh:mm:ss> to [days-of-week]<hh
:mm:ss>
<hh:mm:ss>
<days-of-week>
This example describes how to enter into standard TimeRange con-
figuration mode.
ZXR10(config)#time-range myTime
ZXR10(config-tr)# periodic daily 08:00:00 to 23:00:00
Display which kinds of state conversion
information
The TimeRange list changes from inactive to
active
The TimeRange list changes from active to
inactive
hour: minute: second. The second has to be
the multiple of 15.
It can be Monday, Tuesday, a specified date
or some days during the week: Monday,
Wednesday, Thursday, Friday, Saturday,
Sunday. Or it can be daily, weekend,
weekdays