Debug Ipv6 Tcp Packet; Debug Ipv6 Tcp Transactions - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume III)
Command Modes
Syntax
Defaults
Instructions
Related
Commands
Purpose
Command Modes
Syntax
Defaults
Instructions
Related
Commands
Purpose
Command Modes
Syntax
92 Confidential and Proprietary Information of ZTE CORPORATION
debugging information, including TCP6 active-open/passive-open,
reconfig tcp build link timer, TCP normal close, abnormal close will
be output. Close the switch with the no command.
Privileged EXEC
debug ipv6 tcp driver
no debug ipv6 tcp driver
If this area is configured, it is disabled by default.
� The platform version 4.6.02 and upgrade versions support this
command.
� The debug ipv6 tcp driver command is similar to the debug
ip tcp driver command, while it is only for the IPv6 protocol.
This command helps the user determine IPv6 TCP connection
active-open/passive-open, normal close and abnormal close.
debug ipv6 tcp all

debug ipv6 tcp packet

Use this command to display the information of TCP6 packet re-
ceived and sent by the system.
packet information received and sent by the system with this com-
mand. No information is output once the switch is closed with the
no command.
Privileged EXEC

debug ipv6 tcp packet

no debug ipv6 tcp packet
If this area is configured, it is disabled by default.
� The platform version 4.6.02 and upgrade versions support this
command.
� This command helps the user understand the TCP packet re-
ceiving and sending interactive condition.
debug ipv6 tcp all

debug ipv6 tcp transactions

Use this command to set the debugging switches for TCP6 state
transition information. When the switches are opened, the TCP
special event information will be output, including TCP connection
destination address, port, reconfigured resend timer time, resend
upon timeout, finite state machine transition, and released TCP
control block. When the no command is used to close the switches,
no information will be output.
Privileged

debug ipv6 tcp transactions

In the privileged mode, view