Line; Password - Zte ZXR10 Command Manual

ZXR10 Command Manual (Basic Configuration Volume III)
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Example
40 Confidential and Proprietary Information of ZTE CORPORATION
<line_number>
all
Use this command to stop an existed reverse telnet connection.
This example describes how to disconnect the reverse telnet con-
nection through line 2.
ZXR10#disconnect line 2

line

Use this command to enter into the line configuration mode.
Global configuration
line <begin-line-number>[<ending-line-number>]
<begin-line-number>
<ending-line-numb
er>
� It is applied to GAR project at present.
�
When the corresponding serial physical connection does not
exist, mistake hint will be returned.
This example describes how to enter line 2 line configuration mode.
ZXR10(config)#line 2
ZXR10(line_config)#

password

Use this command to set user login password for a line.
LINE Configuration
password <password>
no password <password>
<password>
This example describes how to set the reverse telnet connection
password to zte on line 2.
ZXR10(config)#line 2
ZXR10(line_config)#password zte
Session number, the value range is 1~64
Stop all line sessions.
Designates line number or the first line
number in a group line
The last line number in a group lines.
User password, character stringthe length is
3~16 characters