Class 0X66 (Extended Object I); Class 0X66 Instance 1 - Mitsubishi Electric FR-A7ND E kit Instruction Manual

7.8

Class 0x66 (Extended Object I)

7.8.1

Class 0x66 Instance 1

Set parameters of the inverter. Refer to the Instruction Manual of the inverter for details of the parameters.
REMARKS
• When reading/writing parameter, Class 0x70 to 0x79 (Extended object III) is recommended. (Refer to page 86)
(1) Attribute
Class 0x66 Instance 1
Attribute ID Parameters Access
10 Get/Set Torque boost
Pr. 0
11 Pr. 1 Get/Set Maximum frequency
12 Pr. 2 Get/Set Minimum frequency
13 Get/Set Base frequency
Pr. 3
14 Pr. 4 Get/Set
15 Get/Set
Pr. 5
16 Get/Set Multi-speed setting (low speed)
Pr. 6
17 Pr. 7 Get/Set Acceleration time
18 Pr. 8 Get/Set Deceleration time
19 Pr. 9 Get/Set Electronic thermal O/L relay
20 Pr. 10 Get/Set
21 Pr. 11 Get/Set
22 Pr. 12 Get/Set
Name
Multi-speed setting (high
speed)
Multi-speed setting (middle
speed)
DC injection brake operation
frequency
DC injection brake operation
time
DC injection brake operation
voltage
Class 0x66 Instance 1
Attribute ID Parameters Access
23 Pr. 13 Get/Set Starting frequency
24 Pr. 14 Get/Set Load pattern selection
25 Get/Set Jog frequency
Pr. 15
26 Get/Set
Pr. 16
27 Pr. 17 Get/Set MRS input selection
28 Get/Set High speed maximum frequency
Pr. 18
29 Pr. 19 Get/Set Base frequency voltage
30 Pr. 20 Get/Set
31 Pr. 21 Get/Set
32 Pr. 22 Get/Set Stall prevention operation level
33 Get/Set
Pr. 23
34 Pr. 24 Get/Set Multi-speed setting (speed 4)
35 Pr. 25 Get/Set Multi-speed setting (speed 5)
OBJECT MAP
Name
Jog acceleration/deceleration
time
Acceleration/deceleration
reference frequency
Acceleration/deceleration
time increments
Stall prevention operation
level compensation factor at
double speed
79
7