Mitsubishi Electric FR-A7ND E kit Instruction Manual page 26

(6) For wiring of FR-E720-5.5K (FR-E720-240) or higher and FR-E740-11K (FR-E740-230) or higher, pass
a cable on the inverter front cover as shown below. If a drop cable is passed through inside the inverter
front cover, the bending radius of the cable becomes small, stressing the cable.
When wiring, take care not to subject the cable to stress.
After wiring, wire offcuts must not be left in the inverter. They may cause a fault, failure or
malfunction.
CAUTION
WIRING
3
19