Controls - Cooper Security i-on 40 Administrator's Manual

i-on40

Controls:

A Full Sets the system. (All detectors in use.) In a
partitioned system this key's function can be programmed
by the installer.
B, C Part Sets the system. (Some of the detectors in use.) In a
and D partitioned system their function can be programmed by
the installer.
Unsets the system.
In menus: scroll up. In text editing: move cursor left
u
In menus: scroll down. In text editing: move cursor right.
n
If the bottom line of the display shows a ">" at the right
>
then pressing this key selects the submenu named on that
line.
If the bottom line of the display shows "On" "Off" "Yes"
"No" "I" (for include) "O" (for omit) then pressing this key
changes the value to its opposite.
Deletes characters when editing names.
<
Press this key to confirm a decision and save any
Y
changes.
a) Moves the display to a higher level of the menu.
X
b) Press this key to abandon your decision when the
display shows "Are you sure Y/N?"
Press this key to gain access to the Menu.
1 to 0, Used to key in access codes. Can also be used to key in
*, # text for names, and telephone numbers.
# Used when keying in text: press to change between
capitals or small letters.
Press these keys to start a Panic Alarm. (Press both at the
same time.)
Introduction
Page 5