Adding Users; Add User - Cooper Security i-on 40 Administrator's Manual

i-on40
To register a device with the user, re-enter the Menu and select
Users - Edit User. Select the user and then the device type you wish
to add.
If a remote control or PA has been stolen and the user it belonged
to no longer has an access code on the system, see page 29.

Adding Users

When adding a new user you can also assign to them proximity
tags, remote controls and panic alarm transmitters. If you do not
wish to assign these devices at the time then you can assign
them later by using the Users - Edit User option.
To add a new user:
1. Enter the Menu and select Users - Add User.
The display shows a default user name, for example: "User
04". Edit the name (for hints on editing text see page 14).
2. Press Y when you have finished editing the name.
The display shows the default type for a new user (Normal
User, see page 7 for a description of user types).
3. Select the type you want to assign to the new user and
press Y.
The display asks you to assign a new user code.
4. Key in the user code you want the new user to employ. ( If
you do not want to assign a code to the user press Y.) Key
the code in a second time when prompted by the display.
The display asks you to present a proximity tag to the
keypad.
5. Present an unused tag to the keypad. If you do not want to
assign one to the user press Y.
The display then asks you to press a button on any remote
control that you want to assign to the user.
6. Press a button on a remote control (one that is not currently
registered to any other user). If you do not have one press
Y.
Administration
Page 21