Types Of User; Access To The System - Cooper Security i-on 40 Administrator's Manual

i-on40 Introduction
of the time there is only one detector per zone, especially with
radio detectors.

Types of User

The i-on40 provides for five different types of user:
Master User This user can add other users to the system, edit
them, or remove them. There is always (at least) one master
user: User 01. Master users can create all other user types,
including other master users. No user can remove User 01 or
change their type. User 01 and all master users always belong to
all partitions.
Administrator This user is similar to a master user, but is limited
to one or more partitions. Admin users can create, delete or edit
other users (including Admin users) belonging to the same
partition(s) but cannot create or delete Master users. Admin users
can assign other users to any of the partitions that the Admin
user belongs to, but cannot assign users to partitions that the
Admin user does not belong to.
Normal User A normal user is assigned to one or more
partitions. They cannot add or delete other users. A normal user
can change their own access code, switch the Chime function on
and off, and operate any outputs that the installer has made
available. Normal users can set and unset their partitions at any
time.
Guard A guard can only unset a partition in alarm, reset it, and
then set the partition again.
Set Only This type of user can set the partition they are allocated
to, but cannot unset any partition.
For details on how to add and remove users see page 16 .

Access to the System

To operate the system a user must identify themselves, either by
entering an access code on the keypad or by presenting a
proximity tag (see next page) to the front of the keypad.
Page 7