Lakeshore 332 User Manual page 127

CRVDEL
Curve Delete Command
Input:
CRVDEL <curve>[term]
nn
Format:
<curve>
Example: CRVDEL 21[term] – Deletes User Curve 21.
CRVHDR
Curve Header Command
Input:
CRVHDR <curve>, <name>, <SN>, <format>, <limit value>,
<coefficient>[term]
nn,aaaaaaaaaaaaaaa,aaaaaaaaaa,n,±nnn.nnn,n
Format:
<curve>
<name>
<SN>
<format>
<limit value>
<coefficient>
Remarks: Configures the user curve header.
Example: CRVHDR 21,DT-470,00011134,2,325.0,1[term] – Configures User Curve 21 with a name of
DT-470, serial number of 00011134, data format of volts versus kelvin, upper temperature
limit of 325 K, and negative coefficient.
CRVHDR?
Curve Header Query
Input:
CRVHDR? <curve>[term]
Format: nn
<curve>
Returned: <name>, <SN>, <format>, <limit value>, <coefficient>[term]
Format: aaaaaaaaaaaaaaa,aaaaaaaaaa,n,±nnn.nnn,n
CRVPT
Curve Data Point Command
Input:
CRVPT <curve>, <index>, <units value>, <temp value>[term]
nn,nnn,±nnnnnnn,±nnnnnnn
Format:
<curve>
<index>
<units value>
<temp value>
Remarks: Configures a user curve data point.
Example: CRVPT 21,2,0.10191,470.000,N[term] – Sets User Curve 21 second data point to 0.10191
sensor units and 470.000 K.
Remote Operation
Lake Shore Model 332 Temperature Controller User's Manual
Specifies a user curve to delete. Valid entries: 21 – 41.
Specifies which curve to configure. Valid entries: 21 – 41.
Specifies curve name. Limited to 15 characters.
Specifies the curve serial number. Limited to 10 characters.
Specifies the curve data format. Valid entries: 1 = mV/K, 2 = V/K, 3 = Ω/K,
4 = log Ω/K.
Specifies the curve temperature limit in kelvin.
Specifies the curves temperature coefficient. Valid entries: 1 = negative,
2 = positive.
Valid entries: 1 – 41.
Specifies which curve to configure. Valid entries: 21 – 41.
Specifies the points index in the curve. Valid entries: 1 – 200.
Specifies sensor units for this point to 6 digits.
Specifies the corresponding temperature in kelvin for this point to 6 digits.
(Refer to command for description)
6-29