Table of Contents
Advertisement
Board Overview
Figure 1. Stratix II DSP Development Board Components & Interfaces
40-Pin Connectors for Analog
Devices A/D Converters (J5, J6)
A/D Converter Clock Selector (J3, J4)
Power
Regulator (U22)
ADC A Input SMA
Connector (J1)
ADC B Input SMA
Connector (J2)
DAC A Output SMA
Connector (J15)
DAC B Output SMA
Connector (J17)
Line In (J7)
Line Out (J8)
Amplified Line Out
Audio Connector
(J9)
D/A Converter Clock Selector (J18 , J19)
Compact Flash (CON1) (on Reverse Side of Board)
Note to
Figure
1:
(1)
A TI-EVM/FPDP connector (J31, J33) is found on the reverse side of the board.
Altera Corporation
This chapter provides operational and connectivity details for the board's
major components and interface, including the components location on
the development board and a description. For detailed part numbers and
manufacturers, refer to the information provided in the
BoardDesignFiles directory.
Figure 1
shows a top view of the board components and interfaces.
External Clock Inputs (J10, J11)
VGA Connector (J35)
Power Switch (SW9)
Ethernet (RJ-45) Connector (RJ1)
Reference Manual
Chapter 2. Board
Components & Interfaces
D/A External Clock Input (J12)
9-Pin RS-232 Connector (J9)
Socketed 100-MHz Oscillator (Y1)
Mictor Connector (J20)
Joint Test Action Group (JTAG) Connectors (J21, J13)
8-Pin DIP Switch (SW2)
Dual Seven-segment Display (U12, U13)
User Push-button Switches (SW4, SW5, SW6, SW7)
User LEDs (D1-D8)
CONF_DONE LED (LED5)
16.0-V DC
Power Supply
Connector (J22)
Expansion
Prototype Connector
(J23, J24, J25)
Configuration-Status LEDs
(LED1-LED4)
Expansion
Prototype Connector
(J26, J27, J28)
2–1
August 2006
Advertisement
Table of Contents
