Table of Contents
Advertisement
184
C
185
1
186
187
Workshop Manual KD 441_cod. 1.5302.865_2
B
A
2
A
3
nd
ed_ rev. 01.
With a special
tool
matr.1460-342, mount the nut on the threaded pin
Keeping lever C displaced, close the hole with plug A and gasket B.
Setting the slow idle (standard) rotation speed
After having filled the engine with oil and fuel, start it and allow it to
warm up for 10 minutes.
Using adjuster screw 1, regulate the idling rate at 1000-1250 rpm.
Tighten the check nut 2.
Setting the fast idle (standard) rotation speed
After having adjusted the idling rate, operate lever A to accelerate the
engine.
Use screw 3 and regulate the top rate at 3800 rpm (for engines set at
3600 rpm on load).
10
Adjustments
- 75 -
Advertisement
Table of Contents
