Adjustments; Accelerator Lever For Speed Governor With Min/Max Speed System; Assembly Procedure For Accelerator Lever Of Speed Governor With Min/Max Speed System - Kohler RD 441 Service Manual

10

ADJUSTMENTS

180
181
182
183
- 74 -

Accelerator lever for speed governor with min/max speed system

A Internal governor lever into control group
B Nut
C Internal accelerator lever into control group
D Lock ring
E Max. speed spring
F Min. speed spring
Assembly procedure for accelerator lever of speed governor with
min/max speed system
Insert the pin in the hole on the internal accelerator lever.
Mount the lock ring on the pin.
pin
lock ring
With a special fork tool matr.1460-341, take the min-max assembly as
shown in the front and top figure.
The threaded pin of the governor lever must
enter in to the hole on the min-max assembly
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev. 01.