150
A
151
152
C
153
Workshop Manual KD 441_cod. 1.5302.865_2
B
nd
ed_ rev. 01.
Fuel pump, drive rod protrusion
Components:
1 Fuel pump
2 Crankcase
3 Drive rod
4 Eccentric
Check while eccentric 4 is at rest (lowest point of travel).
Protrusion A of drive rod 3 is 1.5÷1.9 mm; it is not adjustable.
Replace the drive rod if it does not comply with tolerance.
Drive rod length 70.8÷80.0 mm
Fuel lift pump - Filter cleaning
To clean the fuel pump filter loosen screw A.
Remove the fuel pump cover B.
Pull out the filter C.
Clean the filter, put it back in seat, mount the fuel pump cover and
retighten the screw to 4.5 Nm.
8
Fuel system
- 63 -