C3
B3CP07SD
Measuring front height
Z1 = Measuring zone underneath the front subframe.
Measure the radius of the front wheel R1 - Calculate dimension H1 = R1–L1
All types except CRD (*)
Raised suspension
Value at reference
height
Administration vehicle
(+ 6 - 8 mm)
C3 version XTR
L1 = 142,5 mm
(*) = CRD: Difficult road conditions.
Definition for a type of vehicle whose axles and suspensions are adapted for driving on rough roads. Compress the suspension to obtain the calculated
values. The height difference between the two axle wheel should be less than 10 mm.
Checks at reference height
[1] Gauge for measuring the wheel radius, 4 bolts, tool 4003-T or 8006-T (according to version) .
CRD (*)
Raised suspension
Administration vehicle
C3 version XTR
L1 = 132,5 mm
AXLE GEOMETRY
Measuring rear height
Z2 = Measuring zone underneath the rear sill..
Measure the radius of the rear wheel R2 - Calculate dimension H2 = R2+L2
All types except CRD (*)
Raised suspension
Value at reference
height
Administration vehicle
(+ 10 - 6 mm)
C3 version XTR
L2 = 52 mm
202
CRD (*)
Raised suspension
Administration vehicle
C3 version XTR
L2 = 62 mm