B1EP1HTC
CHECKING THE VALVE TIMING
Note: The index «c» of the dynamic tensioner roller should be centred in the interval «d».
Check the correct positioning of the index «c».
If it is not correct, repeat the operation to tension the timing belt (see corresponding operation) .
Remove tools [2] and [3].
Refitting.
Proceed in reverse order.
Tightening torques.
Method for tightening the screw (8):
- Pre-tightening
- Angular tightening
Engine support (7) tighten to
Engine support (4) tighten to
Engine support (5) tighten to
Exhaust line clip: tighten to
Front RH wheel: tighten to
IMPERATIVE: Perform the operations that are necessary following a reconnection of the
battery (see corresponding operation) .
127
Engine: 9HX
: 3 ± 0,3 m.daN.
: 180° ± 5°.
: 1,5 ± 0,4 m.daN.
: 6,1 ± 0,6 m.daN.
: 6 ± 0,6 m.daN.
: 2,5 ± 0,3 m.daN.
: 9 ± 1 m.daN.
C3