C2
Tyres inflated to correct pressures.
E1APOBZD
Front height
H1 = R1 – L1
H1 = Measurement between the measuring zone underneath the front
subframe and the ground.
R1 = Front wheel radius under load.
L1 = Distance between the wheel axis and the measuring zone
underneath the front subframe.
Conditions for checking and adjusting
Vehicle at reference height. Steering rack locked at mid point (see corresponding operation) .
Vehicle heights at reference height
L1
AXLE GEOMETRY
H2 = R2 + L2
H2 = Measurement between the measuring zone underneath the rear
sill and the ground.
R2 = Rear wheel radius under load.
L2 = Distance between the wheel axis and the measuring zone
underneath the rear sill.
190
Rear height
L2